Huge low-noise cables and incredibly tiny medical camera connections are just a couple of the many uses for coaxial. Whether it's a typical 50-ohm coax or another specially created system, FLU-TEF WIRES & CABLES PVT. LTD. builds and tests a cable to perfectly suit the impedance and loss requirements of any system. Frequency analysis up to 40 GHz, impedance measurements, low noise cable testing, attenuation measurements, and a variety of additional electrical tests are also available.
Contruction
- A Conductor : Stranded silver plated copper Covered steel (SCCS) or Stranded silver plated copper
- B Dielectric : PTFE taped & sintered.
- C Coating : Low noise coating At the dielectric surface
- DShield : Single or Double Round Braided shield of Silver Plated copper
Coverage: 90 % nominal - EJacket: PTFE taped & sintered
Color: BLUE FEP is also available
Note: Above cables are also manufactured in Triaxial version
| Part no | Conductor AWG | No of strands X Strand diameter n x mm |
Conductor diameter mm |
Primary core diameter with low noise coating mm |
Inner braid strand diameter |
Outer braid strand diameter |
Finished Cable Diameter |
Cable weight g/m nom |
| F196LN | 30/7/38 -SCCS | 7 x 0.10 | 0.30 | 0.91 ± 0.05 | --- | 0.10 | 1.90 | 9 |
| F187LN | 30/7/38 -SCCS | 7 x 0.10 | 0.30 | 1.62 ± 0.05 | --- | 0.10 | 2.54 | 18 |
| F188LN | 25/7/33 -SCCS | 7 x 0.17 | 0.51 | 1.58 ± 0.05 | --- | 0.10 | 2.54 | 18 |
| F400LN | 20/19/32-SPC | 19 x 0.20 | 0.98 | 3.00 ± 0.10 | 0.13 | 0.13 | 4.95 | 74 |
ELECTRICAL CHARACTERISTICS
| Part no | Velocity propagation % |
Characteristics Impedance Ohms Nominal |
Maximum. Capacitance pF / meter |
Maximum Voltage rating |
Maximum Operating frequency GHz |
Minimum bending radius S:static D:Dynamic mm |
| F196LN | 70 | 50 | 105 | 500 VAC | 1 | S:20,D:40 |
| F187LN | 70 | 75 | 75 | 900 VAC | 3 | S:20,D:40 |
| F188LN | 70 | 50 | 105 | 900 VAC | 3 | S:20,D:40 |
| F400LN | 70 | 50 | 105 | 1400 VAC | 12.4 | S:30,D:60 |
Composition
- Conductor: Stranded silver-plated copper or stranded silver-plated copper over covered steel (SCCS).
- Dielectric: sintered and taped PTFE.
- Noise-reducing coating at the surface of the dielectric.
- A single or double round braided copper shield with silver plating.
- Jacket: PTFE taped & sintered
- Colour: BLUE FEP is also available
Features
For complex signal measurements, FLU-TEF WIRES & CABLES PVT. LTD. developed low-noise cables in the form of coax and triax. A range of applications can use the transmission of weak, high-impedance analogue sensor signals made possible by low-noise technology and a semi-conductive layer.
- Reduces microphonic and triboelectric noise.
- Designed for measuring current and charge with extreme sensitivity,
- Reduction in triboelectric noise by a factor of 1,000.
- Coaxial design that is highly shielding.
- Fully put together with high-grade connectors.
- Guaranteed to have an ultra-high insulation resistance of >1014.
- The available lengths range from 10 cm to 5 m.
- Bespoke lengths are available
The Low-noise cable is designed to be used in circumstances where it is flexed, bent, or torn by mechanical forces. When using a conventional connection, such outside factors can cause significant disruptions. Yet, to reduce these disruptions, those cables contain a unique interlayer.
OPERATING TEMPERATURE RANGE : -55°C to 200°C
Engineering information: This cable is useful to reduce Triboelectric noise level
Applications: Piezoelectric Component, Oscilloscope Probe, High gain audio amplifier, Accelerometers, Magnetic recording heads
Send Inquiry